Page 1373 - Foton Workshop Manual - Aumark (BJ1099)

SUPPLEMENTAL RESTRAINT SYSTEM - DRIVER AIRBAG 42-9

2. Functional self-examination of special tool
(a). Prepare one battery as the power source
for deployment of airbag.
(b). Connect the special tool onto the battery.
NOTICE:
Battery
The yellow connector is used to connect the
airbag.

Special
tools

fuwx42010

(c). Press the deployment switch and check
whether the indicator lamp turns on.
Standard: ON
NOTICE:
If the indicator lamp is already on before the
Special deployment switch is pressed, it indicates that the
tools
special tool is probably malfunctioned. In such
case, do not use the special tool.
42

fuwx42011

3. Scrap the driver airbag assembly
WARNING:
• While scrapping the driver airbag assembly, never use the user’s vehicle to deploy the
airbag.
• Make sure to deploy the airbag as per the following operation procedure.
(a). Prepare one battery as the power source for deployment of airbag.
(b). Remove the driver airbag assembly (Refer to "Chapter 42 Supplemental Restraint
System - Driver Airbag, Replacement")

Page 1373