Page 1378 - Foton Workshop Manual - Aumark (BJ1099)

42-14 SUPPLEMENTAL RESTRAINT SYSTEM - CLOCK SPRING

CLOCK SPRING

REPLACEMENT

1. Notices (Refer to "Chapter 42 Supplemental Restraint System - Supplemental
Restraint System, Notices")
2. Disconnect the negative cable of the battery (Refer to "Chapter 18 Starting And
Charging - Battery, Replacement")
3 . Disconnect the positive cable of the battery (Refer to "Chapter 18 Starting And
Charging - Battery, Replacement")
4. Remove the Horn button assembly (Refer to "Chapter 42 Supplemental Restraint
System - Driver Airbag, Replacement")
5. Remove the steering wheel (Refer to "Chapter 37 Steering Mechanism - Steering
Wheel, Overhaul")
6. Remove upper and lower enclosures of combination switch (Refer to "Chapter 37
Steering Mechanism- Combination Switch, Replacement")

7. Remove the clock spring
(a). Disconnect the horn harness connector.
(b). Disconnect the airbag harness connector.
(c). Take down the clock spring.

8. Install the clock spring
(a). Carefully install the clock spring and ensure
that the flexible cables are free of disorder
and breakage and the surface insulation is
free of damage.
NOTICE:
It indicates that the clock spring is installed
properly when a click sound is heard.
(b). Connect the horn harness connector.
(c). Connect the airbag harness connector.
NOTICE:
After the installation, the flexible cables shall be
stable without noise during the rotation of the
rotary body.

Page 1378