Page 1379 - Foton Workshop Manual - Aumark (BJ1099)

SUPPLEMENTAL RESTRAINT SYSTEM - CLOCK SPRING 42-15

9. Install upper and lower enclosures of combination switch (Refer to "Chapter 37
Steering mechanism- combination switch, replacement")

10. Center the clock spring
(a). Ensure that the ignition switch is at position
LOCK.
(b). Ensure that the positive and negative
cables of the battery are disconnected.
WARNING:
Make sure to disconnect the positive and negative
cables of the battery and wait for 90s before the
subsequent operations.
NOTICE:
The centering operation instruction is printed o
the front face of the clock spring.
(c). Adjust the front wheels to straight forward
position.
(d). Rotate the rotary body counter-clockwise,
till it can’t be rotated further.

(e). Rotate the rotary body clockwise for
approximate 3 turns and align the
markings. 42
NOTICE:
• A new clock spring is fixed at central position by
locating clamp so that no centering is required.
• After the installation, make sure to remove the
locating clamp.

11. Install the steering wheel (Refer to "Chapter 37 Steering Mechanism - Steering
Wheel, Overhaul")
12. Install the Horn button assembly (Refer to "Chapter 42 Supplemental Restraint
System - Driver Airbag, Replacement")
13. Connect the positive cable of the battery (Refer to "Chapter 18 Starting And
Charging- Battery, Replacement")
14. Connect the negative cable of the battery (Refer to "Chapter 18 Starting And
Charging - Battery, Replacement")
15. Check the SRS indicator lamp

Page 1379