Page 1380 - Foton Workshop Manual - Aumark (BJ1099)

42-16 SUPPLEMENTAL RESTRAINT SYSTEM - AIRBAG CONTROL UNIT

AIRBAG CONTROL UNIT

REPLACEMENT

1. Notices (Refer to "Chapter 42 Supplemental Restraint System - Supplemental
Restraint System, Notices")
2. Disconnect the negative cable of the battery (Refer to "Chapter 18 Starting And
Charging - Battery, Replacement")
3. Disconnect the positive cable of the battery (Refer to "Chapter 18 Starting And
Charging - Battery, Replacement")
4. Remove the instrument panel (Refer to "Chapter 52 Instrument Panel And Auxiliary
Instrument Panel - Instrument Panel, Replacement")
5. Remove the driver/front passenger seat (refer to “Chapter 53 Seat pedestal
-Replacement, driver/front passenger seat”)
6. Remove the airbag control unit
(a). Ensure that the ignition switch is at position LOCK.
(b). Ensure that the positive and negative cables of the battery are disconnected.
WARNING:
• Make sure to disconnect the positive and negative cables of the battery and wait for 90s
before the subsequent operations.
• Never knock the airbag control unit under power-on status.

(c). Tilt up the front carpet, remove the fixing
bolt and nut of the left and right rear row
foot-blowing ducting, and take down the
ducting.

fuwx42048

Page 1380