Page 1506 - Foton Workshop Manual - Aumark (BJ1099)

45-22 AUDIO SYSTEM - ANTENNA ASSEMBLY

(e). Remove the antenna glass assembly with
a glass sucker.
NOTICE:
Take cautions not to fall off the antennal glass.
While removing the antenna glass, leave as many
adhesive as possible on the body.

4. Install the antenna assembly
(a). Clean and finish the contact surface of the
body.
• Use a knife to remove the glass adhesive
from the contact surface of the body.
• Use a cloth dipped with detergent to
clean the contact surfaces between the
body and the antenna glass.
NOTICE:
Take cautions not to damage the body.
Clean the body, even all glass adhesives are
removed.

(b). Clean the area on which the primer of antenna assembly is to be applied.
(c). Apply a thin film of primer onto the installation position of the antenna assembly.
NOTICE:
• After the application of primer, never touch the surface with your hand, otherwise it will
easily cause water leakage to the portions with application of primer.
• It’s prohibited to apply body primer to the antenna assembly.
• Guard the surfaced applied with primer against contamination of water, dust, and foreign
material.

Page 1506