Page 1840 - Foton Workshop Manual - Aumark (BJ1099)

61-50 CIRCUIT - SYSTEM SCHEMATIC DIAGRAM

System description:
Starter system
The battery current provides electric power to the starter relay R03 pin 3 via the fuse F3
in the engine compartment fuse box. With the ignition switch located at ST, the current
flows from the fuse F17 in the internal fuse box to the starter relay R3 pin 1, and then
from the starter relay R03 pin 2 to the gearshift mechanism P02 pin 10, and the gearshift
mechanism is detected to be at the P/N position; thus the coil is electrified to generate
a magnetic field to close the starter relay R03 contact.Output to the starter K06 pin 1
through the starter relay R03 pin 5. To starter electromagnetic switch which is electrified to
generate a magnetic field to close the starter contact switch.
The battery current flows into the starter motor through the starter contact, and then the
starter brings the engine flywheel to rotate via the gear.

：Parts Location

No. Reference harness No. Reference harness

A40 Engine compartment wiring harness K05 Battery wiring harness

C05 Front wall instrument wiring harness K06 Battery wiring harness
C13 Front wall instrument wiring harness P02 Transmission case wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and engine compartment wiring harness
C201 A301
(Left side of instrument cross member)

Front wall instrument wiring harness and engine compartment wiring harness
C206 A306
(Left side of instrument cross member)
Battery wiring harness and engine compartment wiring harness (Beneath the
K201 A401
battery)

：Ground

No. Ground position
C01 Left A pillar

Page 1840