Page 1842 - Foton Workshop Manual - Aumark (BJ1099)

61-52 CIRCUIT - SYSTEM SCHEMATIC DIAGRAM

System description:
With the ignition switch located at ON/ST, the current flows into the instrument cluster pin 1
through the fuse F26 in the internal fuse box, and then is output from the instrument cluster
pin 17 through the charging indicator lamp to reach the generator pin L to flow into the
generator, and then into the motor excitation winding through the internal voltage regulator;
thus the excitation winding is electrified to generate a magnetic field.
The generator rotates, and the stator winding cuts the magnetic line of force to generate
a three-phase induced electromotive force which is transformed into the direct current via
the rectifier composed of the diode. Then it is output from the generator pin B to charge
the battery via the fuse F28 in the engine compartment fuse box, and to provide electric
energy to other electric equipment.

：Parts Location

No. Reference harness No. Reference harness

E01 Engine harness A40 Engine compartment wiring harness

E26 Engine harness C23 Front wall instrument wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and engine compartment wiring harness
C801 E101
(Right side of instrument cross member)

Page 1842