Page 1859 - Foton Workshop Manual - Aumark (BJ1099)

CIRCUIT - SYSTEM SCHEMATIC DIAGRAM 61-69

System description:
The battery current is output to the fuse F4 in the internal fuse box from the fuse F2 in
the engine compartment fuse box, and then to the pin 1 of the brake switch C09. With the
brake pedal depressed, the brake switch will be closed, and the current is output from the 61
pin 2 of the brake switch to the pin 1 of left rear grouped lamp, pin 1 of right rear grouped
lamp and pin 1 of high-mounted brake lamp; after flowing through the filament, the current
is then output and earthed from the pin 4 of left rear grouped lamp, pin 4 of right rear
grouped lamp and pin 2 of high-mounted brake lamp to activate the brake lamp and the
high-mounted brake lamp.
Repair prompt
• C09 Brake switch
1 － 2：activated when the brake pedal is depressed.

：Parts Location

No. Reference harness No. Reference harness

A40 Engine compartment wiring harness D52 Floor wiring harness

C05 Front wall instrument wiring harness D54 Floor wiring harness
C09 Front wall instrument wiring harness L01 Tailgate transition wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and engine compartment wiring harness
A301 C201
(Left side of instrument cross member)

Front wall instrument wiring harness and engine compartment wiring harness
A306 C206
(Left side of instrument cross member)
Front wall instrument wiring harness and floor wiring harness (Beneath left A
C301 D201
pillar)

D601 L301 Floor wiring harness and tailgate transition wiring harness (Beneath left D pillar)

：Ground

No. Ground position No. Ground position

D51 Left D pillar D55 Right D pillar

Page 1859