Page 1863 - Foton Workshop Manual - Aumark (BJ1099)
P. 1863

CIRCUIT - SYSTEM SCHEMATIC DIAGRAM                            61-73

                 System description:
                 Front fog lamp
                 Working conditions: The lamplet must be turned on.
                 The battery provides electric power to the pin 1 and pin 3 of the front fog lamp relay R07         61
                 via the fuses F28 and F18 in the engine compartment fuse box; With the front fog lamp
                 switch in the switch cluster turned on, the pin 7 of the switch cluster is earthed, and the
                 current is output from the pin 8 to the pin E9 of the body control module connector C58 to
                 provide the front fog lamp switch activation signal;The current is output from D16 of the
                 body control module C57 to the pin 2 of the front fog lamp relay R07, and thus the coil is
                 electrified to generate a magnetic field to close the contact. After the contact of the front
                 fog lamp relay R07 is closed, the current will be output from the pin 5 to the pin 1 of front
                 fog lamp, and after passing through the filament, it is earthed from the pin 2 to activate the
                 front fog lamp.
                 Rear fog lamp
                 Working conditions:The lamplet must be turned on, and the front fog lamp and/or headlamp
                 must be turned on.
                 For the two-wheel-drive models:
                 With the rear fog lamp switch turned on, the pin 7 of the rear fog lamp switch is earthed,
                 and the signal is output from the pin 9 to the pin E10 of the body control module C58. To
                 provide the rear fog lamp activation signal;The power is output from C8 of the body control
                 module connector C56 to the pin 1 of the rear fog lamp, and after passing through the
                 filament, it is earthed from the pin 2 to activate the rear fog lamp.
                 Repair prompt
                 • C16 switch cluster
                    7 - 8:activated when the switch cluster is located at the lamplet position, headlamp
                 position and front fog lamp position.
                 • C017 rear fog lamp switch
                    7 - 9:activated when the switch cluster is located at the lamplet position, headlamp
                 position and rear fog lamp position.


                     :Parts Location

                     No.             Reference harness               No.             Reference harness

                     A05       Engine compartment wiring harness     C56       Front wall instrument wiring harness

                     A34       Engine compartment wiring harness     C57       Front wall instrument wiring harness
                     A40       Engine compartment wiring harness     C58       Front wall instrument wiring harness
                     C05             Frame wiring harness            N02          Rear bumper wiring harness

                     C16             Frame wiring harness            N05          Rear bumper wiring harness


                     :Connectors Among The Harness









                                                                                                     Page 1863
   1858   1859   1860   1861   1862   1863   1864   1865   1866   1867   1868