Page 2096 - Foton Workshop Manual - Aumark (BJ1099)

62-44 DIAGNOSIS-POWER WINDOW

(b). Disconnect the driver door control switch
assembly connector J04.

fuwx62263

(c). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
J04(6) - C57(D13) ＜ 2 Ω

J04(8) - C57(D12) ＜ 2 Ω

J04(15) - C57(D10) ＜ 2 Ω
J04(16) - C57(D11) ＜ 2 Ω

Is the result normal?
Yes>To step 8.
No >Repair or replace the harness.

8. Check harness and connector (Driver door control switch-grounding)

(a). Ignition switch:"OFF".
(b). Disconnect the driver door control switch assembly connector J04.

(c). Measure the resistance between the
grounding and the No.11 pin of driver door
control switch assembly connector J04 by
multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

J04(11) - Grounding ＜ 2 Ω

Page 2096