Page 2101 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-POWER WINDOW 62-49

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect by Standard value
multimeter 62
J04(6)- C57(D13) ＜ 2 Ω

Is the inspection result normal?
Yes>To step4.
No >Repair or replace the harness.

4. Check Driver door control switch assembly

(a). Unplug the driver door control switch assembly connector J04.

(b). Measure the resistance with the multimeter.

Connect the pin Conditions Standard
by multimeter value

Left front
J04 (6) -J04(11) electric Approx
1.2kΩ
window up

Left front
electric
J04 (6) -J04(11) ≤ 2 Ω
window
down

Is the inspection result normal?
Yes>To step 5.
No >Repair Driver door control switch assembly.

5. Check harness and connector (Driver door control switch assembly-grounding)

(a). Ignition switch:"LOCK".
(b). Unplug the driver door control switch assembly connector J04.
(c). Disconnect the BCM control unit connector C57.

Page 2101