Page 2102 - Foton Workshop Manual - Aumark (BJ1099)

62-50 DIAGNOSIS-POWER WINDOW

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
J04(11)-Grounding ＜ 2 Ω

Is the inspection result normal?
Yes>To step 6.
No >Repair or replace the harness.

6. Check harness and connector (Driver door power window motor-BCM control unit)

(a). Ignition switch:"LOCK".
(b). Unplug the driver door power window motor connector J01.
(c). Disconnect the BCM control unit connector C54.

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

J01(1) - C54(A12)
＜ 2 Ω
J01(2) - C54(A11)

Is the inspection result normal?
Yes>Replace the driver door power window motor.
No >Repair or replace the harness.

Page 2102