Page 2100 - Foton Workshop Manual - Aumark (BJ1099)
P. 2100
62-48 DIAGNOSIS-POWER WINDOW
(c). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)
Connect the pin by Standard value
multimeter
F13(30A) - C55(B7) ＜ 2 Ω
Is the inspection result normal?
Yes>To step 3.
No >Repair or replace the harness.
3. Check harness and connector (Driver door control switch assembly-BCM control unit)
(a). Ignition switch:"OFF".
(b). Unplug the driver door control switch
assembly J04.
fuwx62262
(c). Disconnect the BCM control unit connector
C57.
fuwx62302
Page 2100
