Page 2205 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-WIPER AND WASHING SYSTEM 62-153

(b). Disconnect the relays R10 and R11.
(c). Check the low-speed relay R10 and the the
high-speed relay R11 of the front wiper with
the multimeter.
Standard resistance:
62
Connect by Standard
Conditions
multimeter value
normal 1–2 Exist

normal 3–4 ＜ 2Ω

Apply the power
supply voltage
between the 3–5 ＜ 2Ω
No.1 and No.2
pin
Is the result normal?
Yes>To step5.
No >Repair or replace the harness.

5. Check the harness and the connector (wiper fuse-front wiper assembly)

(a). Ignition switch:"LOCK".

(b). Disconnect the connector A16 of the front
wiper assembly.
(c). Measure the resistance with the multimeter
on the resistance range.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
R11(4)-A16(5) ＜ 2Ω

R11(5)-A16(3) ＜ 2Ω

Is the result normal?
Yes>To step6.
No >Repair or replace the harness.

Page 2205