Page 2231 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-WIPER AND WASHING SYSTEM 62-179

(b). Disconnect the connector C56 of the BCM
control unit.
(c). Disconnect the connector M06 of the rear
wiper.
(d). Measure the resistance between C56 and
M06 with the multimeter on the resistance 62
range.
Standard resistance: (check whether there
is an open circuit)
Connect the pin by Standard value
multimeter
M06 (4)-C56(7) ＜ 2Ω
Is the inspection result normal?
Yes> To step 6.
No >Repair or replace the harness relating to the connection.

6. Check the rear wiper motor

(a). Ignition switch:"LOCK".

(b). Disconnect the connector M06 of the rear
wiper assembly.
(c). Check the function of the rear wiper motor.

Conditions Connect pins Specified
value

Apply the battery Battery (+)-3 The rear
voltage between wiper
the No.3 and Battery(+)-4 motor is
No.4 pins running
Is the result normal?
Yes>Find the causes from other symptoms.
No >Replace the rear wiper motor assembly.

Page 2231