Page 873 - Foton Workshop Manual - Aumark (BJ1099)

TRANSMISSION - SECOND SHAFT ASSEMBLY 21A-31

8. Remove the first gear assembly
(a). Remove the first gear assembly.

(b). Remove the first gear needle bearing.

9. Check the second shaft 21A
(a). Measure the second shaft round runout.
Standard:0~0.2mm

10. Check the radial clearance between the
synchronizer ring and the gear
(a). Check the radial clearances between
all gear synchronizer assemblies,
synchornizer rings and gears.
Limit:0.5mm
NOTICE:
• Check the radial clearances of all gear synchronizer
rings and gears in the same direction.
• If the clearance exceeds the limit, replace the
synchronizer ring and/or gear.

Page 873