Page 876 - Foton Workshop Manual - Aumark (BJ1099)

21A-34 TRANSMISSION - SECOND SHAFT ASSEMBLY

13. Install the second gear module
(a). Install the second gear needle bearing.
NOTICE:
• When installed in the gear, the needle bearing
shall be no higher than the gear end, or check
the installation position or replace the bearing.
• When installing the needle bearing, shake it and
check for missing needle. Replace it in case of
any damage.
• During installation, apply some lubricant to the
needle bearing, to avoid wear caused by dry
friction.

(b). Install the second gear.

(c). Install the second/third gear washer and
washer ring module.

14. Install the third gear module
(a). Install the third gear needle bearing.

Page 876