Page 2360 - Foton Workshop Manual - Sauvana

62-308 DIAGNOSIS-LIGHTING SYSTEM

(d). Connect the positive and negative electrode
of the bulb to the positive and negative
electrode of the battery respectively to
check if the bulb will light up.

Is the result normal?
Yes>To step 3.
No >Replace the bulb.。

3. Check the dipped headlight relay

(a). Ignition switch:"LOCK".
(b). Pull out the dipped headlight relay R2.

(c). Check the dipped headlight relay R2 with
the multimeter.

Multimeter Specified
Condition
connection value
Apply the power
supply voltage
between the 3-5 Existed
No.1 and No.2
pin

Ordinary state 1-2 <2Ω
Is the inspection result normal?
Yes>To step 4.
No >Replace the dipped headlight relay.

4. Check the harness disconnection

(a). Ignition switch:"LOCK".
(b). Disconnect the left front combination lamp connector A28.
(c). Disconnect the right front combination lamp connector A03.

Page 2360