Page 2365 - Foton Workshop Manual - Sauvana
P. 2365

DIAGNOSIS-LIGHTING SYSTEM                               62-313

                 Symptom description:
                 Whether the combination switch is turned to the "dipped headlight" gear or not, the dipped
                 headlights of both sides are often bright.


                 Diagnosis Procedure
                                                                                                                    62

                 1.     Check the short circuit to the power supply of the harness


                 (a).   Ignition switch:"LOCK".
                 (b).   Disconnect the left front combination lamp connector A28.
                 (c).    Disconnect the right front combination lamp connector A03.
                 (d).   Turn the combination switch to the "dipped headlight" gear.


                                                            (e).   Measure the resistance between the No.2
                                                                   terminal of the left front combination
                                                                   lamp connector A28 and also the No.2
                                                                   terminal of the right front combination lamp
                                                                   connector A03 and the grounding with a
                                                                   multimeter.
                                                                   Standard voltage: (check whether there is
                                                                   a short circuit)

                                                                     Connect the pin by      Standard value
                                                                         multimeter
                                                                      A28(2) - Grounding            0V

                                                                      A03(2) - Grounding            0V

                 Is the inspection result normal?
                 Yes>To step 2.
                 No >Maintain or replace the harness short circuit to the power supply between the A28 and
                         the left dipped fuse, as well as between the A03 and the right dipped fuse.


                 2.     Check harness short circuit to the grounding


                 (a).   Disconnect the body controller connector C57.






















                                                                                                     Page 2365
   2360   2361   2362   2363   2364   2365   2366   2367   2368   2369   2370