Page 1400 - Foton Workshop Manual - Tunland (AT)

15-26 ENGINE MECHANICAL - ENGINE ACCESSORY BELT

ENGINE ACCESSORY BELT

OVERHAUL
1 . Switch off the ignition.
2 . Open the engine hood.
3 . Wait until the engine cools down.
4 . Drain the coolant. (Refer to "Chapter 05 Vehicle maintenance - Replacement,
coolant replacement")
15
5 . Loosen the clamp screws, pull out the
engine water outlet hose.

6 . Turn the accessory belt tension pulley
bolts clockwise with a tool until the
attachment belt is completely relaxed.

7 . Remove the accessory belt and inspect. If the following damage occurs, replace
the accessory belt:

NOTICE

• Water or grease on the belt will quickly reduce its service life.Therefore, after
removal, protect the belt, the belt pulley and the tensioner from water or grease.
Do not wash these parts. In case of heavy contamination, replace it with a new
one.
• If any water or grease is found on these parts, check whether there is fluid
leakage in the engine.

Page 1400