Page 1402 - Foton Workshop Manual - Tunland (AT)

15-28 ENGINE MECHANICAL - ENGINE ACCESSORY BELT

8 . Attach the accessory belt to each pulley,
tensioning wheel and idler wheel, leaving
the generator pulley without the upper belt.
Then turn the tensioning wheel bolts
clockwise with the tool, and attach the belt
to the generator pulley and loosen the
tensioning wheel.
NOTICE
15
• After installing the accessory belt , check
whether the belt is properly fitted to the
pulleys. If the relative position of the belt
and pulley is offset , tighten the tensioner
nut with a tool. Loosen the accessory belt
slightly, then make adjustments.

9 . Install the engine water outlet hose, tighten
the clamp screws.

10 . Fill up the coolant . (Refer to "Chapter 05 Vehicle maintenance - Replacement,
coolant replacement")
11 . Close the engine hood.

Page 1402