Page 1480 - Foton Workshop Manual - Tunland (AT)
P. 1480

16-4                                EXHAUST - EXHAUST PIPE

           EXHAUST PIPE

           REPLACEMENT
                NOTICE


           •      Apply some engine oil on contact surface of rubber lifting lug to facilitate removal
                  and installation.
           •      Replace a new gasket when installing the exhaust pipe.The old one should not
                  be used as it may lead to poor sealing of exhaust.
           •      The exhaust pipe gasket is usually stuck on the exhaust pipe sealant surface.
      16          Before installing a new gasket, scrape the surface clean to avoid leakage after
                  installation.

           1 .    Switch off the ignition.
           2 .    Wait until the exhaust system fully cools down.
           3 .    Raise the vehicle.

                                                      4 .    Remove the connecting nuts of the rear
                                                             exhaust pipe assembly and the muffler
                                                             assembly, remove the gasket.





















                                                      5 .    Apply some engine oil on rubber lifting lug
                                                             connections. Remove the rubber lifting lug
                                                             of the rear exhaust pipe assembly. Remove
                                                             the rear exhaust pipe assembly.





























                                                                                                        Page 1480
   1475   1476   1477   1478   1479   1480   1481   1482   1483   1484   1485