Page 2608 - Foton Workshop Manual - Tunland (AT)

84-12 SEAT - DRIVER'S SEAT/FRONT PASSENGER SEAT

(g) Unscrew two screws.
(h) Disconnect the connector of the electric
buckle wire harness.
(i) Remove the driver's seat assembly.
DANGER

Since the driver's seat assembly is heavy, be
careful during handling.
WARNING

• Take care not to scratch the surface of
nearby parts and components.
• Store it carefully and protect the guide
from malposition.

4 . Remove the front passenger seat assembly.
NOTICE

• Remove the front passenger seat assembly following the same procedure as
the driver's seat assembly.
• There is no connector of electric buckle wire harness in the front passenger
seat.

84 5 . Install the driver's seat assembly
Slowly turn the driver's seat backward and place it on the carpet about the welded
base assembly for the moment.

DANGER
Since the driver's seat assembly is heavy, be careful during handling.

WARNING

• Take care not to scratch the surface of nearby parts and components.
• Store it carefully and protect the guide from malposition.

(a) Connect the connector of the electric buckle
wire harness .
(b) Tighten 2 bolts.

Torque: 45～55 N·m

Page 2608