Page 752 - Foton Workshop Manual - Tunland (AT)

04-606 DIAGNOSTICS - AUTOMATIC TRANSMISSION

(b) Examine resistance between parking brake
lock connector C004 Pin 2 and gearshift lever
connector P002 Pin 9 with a multimeter.
Standard resistance:(Check for broken
circuit)

04 Multimeter connection Standard value
pin
C004(2) - P002(9) ≤ 2Ω

Check if the result is normal?
YES> To step 5.
NO>Repair circuit between parking brake lock connector C004 Pin 2 and gearshift
lever connector P002 Pin 9.

5 . 5. Check harness and connector(TCU- gearshift lever)
(a) Ignition switch:"OFF".
(b) Disconnect TCU connector P001 .
(c) Disconnect connector P002 of the gearshift lever.

(d) Examine resistance between TCU connector
P001 Pin 7 and gear gearshift lever P002 Pin
7 and resistance between connector TCU
P001 Pin 11 and gear gearshift lever P002
Pin 8 with a multimeter.
Standard resistance:(Check for broken
circuit)

Multimeter connection Standard value
pin

P001(7) - P002(7) ≤ 2Ω

P001(11) - P002(8) ≤ 2Ω

Check if the result is normal?
YES> To step 6.
NO> Repair or replace the harness

6 . Check the gearshift lever
(a) Ignition switch:"OFF".
(b) Disconnect connector P02 of the gearshift lever.
(c) Replace with a new gearshift lever with normal functions.

Page 752