Page 848 - Foton Workshop Manual - Tunland (AT)

04-702 DIAGNOSTICS - POWER DOOR LOCK CONTROL SYSTEM

BASIC INSPECTION

Inspection Measures
Steps
contents
Yes No> go to step 2
Check Battery voltage
04 • Battery voltage shall not be lower than Charge or replace the bat-
1 tery. Refer to “Chapter
12V. No?
20A, start and charge- bat-
Check whether the result is normal?
tery”

Check basic functions Yes No> go to step 3
• Use lock master control switch to con-
trol the lock and unlock of all doors
• Use key to lock the door on the side of
the driver, all the doors should be
2 Go to defect phenomenon
locked. No?
• Use key to lock the door on the side of form
the driver, all the doors should be
locked.
Check whether the result is normal?

Check lock-prevention function of the Go to defect phenomenon
Yes
keys form
• Insert the key of the door into the igni-
tion switch.
• When the driver's door is open, press
down driving lever beside the driver to
3 lock the door, and all the doors should
be locked and then unlocked. No? Replace body controller
• When the driver's door is open, press
down master control switch of the door
and all the doors should be locked and
then unlocked.
Check whether the result is normal?

Page 848