Page 880 - Foton Workshop Manual - Tunland (AT)

04-734 DIAGNOSTICS - WIPER & WASHER

(d) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)

C035 Multimeter connection
04 stitch Specified value

R10（2）-C035
R10 （D23） ＜ 2 Ω

ftwxd041504

Check whether the result is normal?
Yes> go to step 6
No > Maintenance or replace harness.

6 . Check the combination switch (wiper).
(a) Ignition Switch: OFF.

(b) Disconnect the connector C012 of
combination switch (wiper).

ftwx641020

(c) Check the combination switch (wiper).

Standard voltage

Multimeter
Specified
Conditions connection
value
stitch
Switch off the
wiper switch 8–9 ≥ 1 MΩ
Turn on the
low-speed gear 8–9 ＜ 2 Ω
of wiper switch

Page 880