Page 881 - Foton Workshop Manual - Tunland (AT)
P. 881
DIAGNOSTICS - WIPER & WASHER 04-735
Check whether the result is normal?
Yes> go to step 7
No > Replace the combination switch.
7 . Check the harness and connectors (combination switch - ground)
(a) Ignition Switch: OFF. 04
(b) Disconnect the connector C012 of
combination switch (wiper).
ftwx641020
(c) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)
C012
1 2 3 4 5 6 7 8 9 10
Multimeter connection Standard value
C012 (8) - ground ＜ 2 Ω
ftwxd041503
Check whether the result is normal?
Yes> go to step 8
No > Maintenance or replace harness.
8 . Check the harness and connectors (combination switch - BCM control unit)
(a) Ignition Switch: OFF.
Page 881
