Page 882 - Foton Workshop Manual - Tunland (AT)
P. 882
04-736 DIAGNOSTICS - WIPER & WASHER
(b) Disconnect the connector C012 of
combination switch (wiper).
04
ftwx641020
(c) Disconnect connector C035 of BCM control
unit.
ftwxd041025
(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)
C035
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 Multimeter connection Standard value
C012(9)-C035(D3) ＜ 2 Ω
C012
1 2 3 4 5 6 7 8 9 10
ftwxd041505
Check whether the result is normal?
Yes> go to step 9
No > Maintenance or replace harness.
9 . Check the harness and connectors (high speed relay of front wiper – front wiper
motor)
(a) Ignition Switch: OFF.
(b) Pull out the high speed relay R11 of front wiper.
Page 882
