Page 2097 - Foton Workshop Manual - Sauvana

DIAGNOSIS-POWER WINDOW 62-45

Is the result normal?
Yes>To step 9.
No >Repair the open circuit between the grounding and the No.11 pin of driver door control
switch assembly connector.

9. Check driver door control switch 62

(a). Disconnect the driver door control switch assembly connector J04.

(b). Measure the driver door control switch
assembly by multimeter.

Connect the pin Conditions Standard
by multimeter value
Left front
J04 (6) -J04(11) power window About
1.2kΩ
rises
Left front
J04 (6) -J04(11) power window ≤ 2 Ω
falls

Right front
J04 (8) - J04(11) power window About
1.2kΩ
rises
Right front
J04(8) - J04(11) power window ≤ 2 Ω
falls
Left rear
J04(15) - J04(11) power window About
1.2kΩ
rises
Left rear
J04 (15) - J04(11) power window ≤ 2 Ω
falls

Right rear
J04(16) - J04(11) power window about
1.2kΩ
rises
Right rear
J04 (16) - J04(11) power window ≤ 2 Ω
falls

Is the result normal?
Yes> After the inspection, turn on the ignition switch again and check whether the fault is
eliminated.
No >Replace the driver door control switch assembly.

Page 2097