Page 2124 - Foton Workshop Manual - Sauvana

62-72 DIAGNOSIS-POWER WINDOW

3. Check harness and connector (Left rear door power window motor-BCM control unit)

(a). Ignition switch:"LOCK".
(b). Unplug the left rear door power window motor I04.
(c). Disconnect the BCM control unit connector C57.

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
I04(5) - C57(D32) ＜ 2 Ω

Is the inspection result normal?
Yes>To step4.
No >Repair or replace the harness between No.D32 pin of BCM control unit and No.5 pin
of left rear door power window motor.

4. Check harness and connector (Left rear door power window motor-rear window fuse)

(a). Ignition switch:"LOCK".
(b). Unplug the left rear door power window motor I04.

(c). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

I04(3) - F14 ＜ 2 Ω

Is the inspection result normal?
Yes>To step5.
No >Repair or replace the harness.

5. Check harness and connector (Left rear door power window motor-grounding)

(a). Ignition switch:"LOCK".
(b). Unplug the left rear door power window motor I04.

Page 2124