Page 2129 - Foton Workshop Manual - Sauvana

DIAGNOSIS-POWER WINDOW 62-77

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter 62
J04(11)-Grounding ＜ 2 Ω

Is the inspection result normal?
Yes>To step 6.
No >Repair or replace the harness.

6. Check harness and connector (Right rear door power window switch-BCM control unit)

(a). Ignition switch:"LOCK".
(b). Unplug the right rear door power window switch H01.
(c). Disconnect the BCM control unit connector C57.

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

H01(3) - C57(D8) ＜ 2 Ω

Is the inspection result normal?
Yes>To step 7.
No >Repair or replace the harness.

7. Check harness and connector (Right rear door power window motor-grounding)

(a). Ignition switch:"LOCK".
(b). Unplug the right rear door power window switch H01.
(c). Disconnect the BCM control unit connector C57.

Page 2129