Page 2128 - Foton Workshop Manual - Sauvana

62-76 DIAGNOSIS-POWER WINDOW

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
J04(16) - C57(D11) ＜ 2 Ω

Is the inspection result normal?
Yes>To step 4.
No >Repair or replace the harness.

4. Check Driver door control switch assembly

(a). Unplug the driver door control switch assembly J04.

(b). Measure the driver door control switch
assembly with the multimeter.

Connect the pin Conditions tandard
by multimeter value

Right rear
J04 (16) -J04(11) electric Approx
1.2kΩ
window up

Right rear
electric
J04 (16) -J04(11) ≤ 2 Ω
window
down
Is the inspection result normal?
Yes>To step 5.
No > Yes>Replace the driver door control switch assembly.

5. Check harness and connector (Driver door power window switch-grounding)

(a). Ignition switch:"LOCK".
(b). Unplug the driver door power window switch J04.
(c). Disconnect the BCM control unit connector C57.

Page 2128