Page 341 - Foton Workshop Manual - Sauvana

ENGINE MECHANICAL - ENGINE ASSEMBLY 12B-51

(b). Install sprocket chamber, fix and fasten the
fixed bolt of sprocket chamber.
Torque : 23N•m

12B

(c). Meanwhile, install transmission shaft and
intermediate shaft of oil pump.
NOTICE:
• When installing, the cylinder block shall be put
horizontally.
• Before installation, you can apply a small
amount of engine oil to the internal surface of
intermediate shaft bearing, intermediate shaft
journal, O-ring of oil pump transmission shaft
and the tooth surface of oil pump drive gear, to
facilitate installation.
• If it is hard to install, you can slightly rotate the
intermediate shaft and oil pump transmission
shaft to make them fully engaged, then rotate
the intermediate shaft to confirm its rotating
flexibility.

(d). Install the thrust washer of intermediate
shaft.
NOTICE:
When installing the thrust washer, make the thrust
washer surface with pit orient to the sprocket
wheel.
(e). Fix and fasten the fixed bolt of thrust
washer.
Torque : 23N•m

Page 341