Page 356 - Foton Workshop Manual - Sauvana

12B-66 ENGINE MECHANICAL - ENGINE ASSEMBLY

17. Install the cylinder outlet pipe joints
(a). Install the outlet pipe, fix it with fixed bolts
and fasten the bolts.
Torque : 10N•m
(b). Install the water temperature sensor.
Torque : 20N•m
NOTICE:
Before installing the water temperature sensor,
apply sealant to the sensor thread.

18. Install knock sensor
(a). Install the knock sensor bolts, fix them with
fixed bolts and fasten the bolts.
Torque : 22N•m
NOTICE:
• When installing the knock sensor, adjust the
plug-in to be level toward the front, which
provides convenience to the follow-up wire
installation.
• In the process of installation, any kind of gaskets
is not allowed. And it must be the metal surface
of the sensor that clings closely to the cylinder
block.

19. Install the fuel injector assembly of the fuel
rail
(a). Aim the injection side of the fuel injector
respectively at the mounting hole of the
cylinder head fuel injector, press it into the
cylinder head, during which the strength of
hands should be equal.
(b). Install and fasten the fixed bolts of the fuel
rail injector assembly.
Torque : 22N•m

Page 356