Page 357 - Foton Workshop Manual - Sauvana

ENGINE MECHANICAL - ENGINE ASSEMBLY 12B-67

NOTICE:
• Before the installation, check whether the O-rings are sealed in good condition or are
scratched.
• After installation, confirm that the O-rings are completely into the mounting hole of the oil
injector, and the oil injector is not tilted.
• Do not tap it with a hammer or other tools when installing , and push it into the mounting
hole vertically.

20. Install the oil filter assembly
(a). Install the oil filter base spacer.
(b). Install the oil filter base, fix it with fixed 12B
bolts and fasten the bolts.
Torque : 23N•m
(c). Install the oil pressure sensor.
NOTICE:
Before installing the oil pressure sensor, apply a
suitable amount of moderate intensity sealant 243
in thread.

(d). Install the oil cooler, and assemble the
hollow bolt and fasten it, make the pipe
connecting mouth towards the rear of
engine.
Torque : 23N•m

Page 357