Page 358 - Foton Workshop Manual - Sauvana

12B-68 ENGINE MECHANICAL - ENGINE ASSEMBLY

(e). Tighten the oil filter by hand, and then use
the oil filter wrench to tighten the oil filter.
NOTICE:
• Oil filter is disposable item and shall not be
reused after removal.
• When installing the oil filter, in order to facilitate
installation, you can apply a small amount of
engine oil to the rubber seal ring of oil filter.
• When tightening the oil filter, after the filter
contacts the mating face of cooler, then screw in
3/4 circle again.

21. Install the warm wind pipe components
(a). Evenly apply Loctite 5999 sealant to the
flange of warm wind water return pipe.
Glue line requirements:
Width: 2~3mm
Thickness: 1mm
(b). For positioning hole, install the flange
gasket.
(c). Install the fixed bolt of warm wind water
return pipe component flange, and fasten
it.
Torque : 22N•m

(d). Install the fixed bolt on the left side of
cylinder body and fasten it.
Torque : 22N•m

Page 358