Page 394 - Foton Workshop Manual - Sauvana

12B-104 ENGINE MECHANICAL - CAMSHAFT

(m). Tighten the No.2 timing sprocket manually.
NOTICE:
Be sure the No.2 timing sprocket is in the state
of tension to avoid the dislocation of the timing
mark of the counter shaft sprocket and the No.2
chain.
(n). Push the phase regulator slightly with a
stick to remove the phase regulator.

(o). Stick on the fixed bolts of the No.1 set
pattern required with the fork end of the
special tools and straighten the left chain
to be supported and fixed on the top of
the special tools. If the distance is not long
enough, the length of the frock can be
adjusted slightly and appropriately.

(p). Remove the fixed bolts from the front gland
of the intake camshaft to remove the front
gland of the camshaft.

Page 394