Page 396 - Foton Workshop Manual - Sauvana

12B-106 ENGINE MECHANICAL - CAMSHAFT

2. Install camshaft
(a). Place the camshaft on the installation
position and tighten the fixed bolts of the
camshaft bearing cap as shown in the
figure.
Torque : 10N•m
NOTICE:
•If there is a direction sign on the bearing cap of
the camshaft, it cannot be interchanged while
installing.
•I2/I3/I4/I5 are used for the intake camshaftandE2/
E3/E4/E5 are used for the exhaust camshaft.
•While installing, the arrow direction of the
bearing cap should be turned to the crankshaft
belt pulley of the engine.
•Spread a small amount of engine oil to the
journal, the bearing hole and the protruding point
of the exhaust camshaft.

(b). Install the fixed bolts on the front gland of
the exhaust camshaft to tighten them to the
torque required.
Torque : 10N•m

Page 396