Page 398 - Foton Workshop Manual - Sauvana

12B-108 ENGINE MECHANICAL - CAMSHAFT

(f). Take the No.2 timing chain manually and
install it on the sprocket of the exhaust
camshaft according to the enfilade marks
made previously.
NOTICE:
• For the convenience of installation, rotate the
exhaust camshaft appropriately with a wrench
before installing.
• While installing, make sure that the marks in the
inspection hole are in the right position.

(g). Set the chain on the phase regulator, install
the phase regulator to the intake camshaft
and install the fixed bolts and tighten them.
Torque : 60N•m
NOTICE:
• For the convenient installation of the
phase regulator, rotate the intake camshaft
appropriately while installing.
• While tightening the fixed bolts of the phase
regulator, stick the hexagon section of the intake
camshaft with a wrench.
• After the installation, check every timing mark
again to make sure the alignment installation is
correct.

(h). Install the No.2 fixed rail, assemble the
fixed bolts and fasten them.

Page 398