Page 526 - Foton Workshop Manual - Sauvana

12C-86 ENGINE MECHANICAL SYSTEM - LUBRICATING SYSTEM

14. Remove the oil pan upper body
(a). Remove the clutch pressure plate assembly (for the longitudinal engine).
(b). Remove the flywheel assembly (for the longitudinal engine).
(c). Remove the flywheel assembly (for the horizontal engine).
(d). Remove the flywheel housing (for the longitudinal engine).
(e). Remove the rear covering plate (for the horizontal engine).
(f). Remove the crankshaft rear oil seal unit (for the longitudinal engine).
(g). Remove the crankshaft rear oil seal unit (for the horizontal engine).
(h). Remove the oil pan weldment (for the longitudinal engine).
(i). Remove the oil pan weldment (for the horizontal engine).
(j). Remove the engine oil filter (for the longitudinal engine) .
(k). Remove the engine oil filter (for the horizontal engine) .
(l). Remove the engine oil pump unit.
(m). Remove the oil pan upper body.

NOTICE:
• The oil pan upper body and cylinder block are sealed using the Loctite 5970 sealant, and
can be slowly knocked around using the rubber hammer.
• Pry out the oil pan upper body on the transmission case side with much care to avoid
damaging the front cover.

•Remove the power pump bracket fixing
bolt ① ( for the longitudinal engine).
•Remove these 4 front cover fixing bolts
(arrow direction).

1

fuwx12C230

•Remove these 14 oil pan upper body
fixing bolts (arrow direction) and the oil
pan upper body.

fuwx12C231

Page 526