Page 528 - Foton Workshop Manual - Sauvana

12C-88 ENGINE MECHANICAL SYSTEM - LUBRICATING SYSTEM

(f). Install the oil pan upper body.
10 8 6 4 2
14 PROMPT:
Align the rear end of oil pan upper body (flywheel
assembly side).
12
(g). Install the oil pan upper body fixing bolts,
tighten the oil pan upper body fixing bolts
with the torque of 15± 2.3 N•m in the
sequence as shown in the figure, and then
13
11 9 7 5 3 1 further rotate them by 90°±13.5° .
fuwx12C236

(h). Install the front cover fixing bolts, tighten the
front cover fixing bolts with the torque of
8± 1.2 N•m in the sequence as shown in
the figure, and then further rotate them by
45°±6.8° .

2 4
3 1

fuwx12C237

(i). Install the power pump bracket fixing bolt
(arrow direction), and tighten the bolt with
the torque of 25±2 N•m (for the longitudinal
engine).

fuwx12C238

(j). Install the engine oil pump unit.
(k). Install the engine oil filter (for the longitudinal engine).
(l). Install the engine oil filter (for the horizontal engine).
(m). Install the oil pan weldment (for the longitudinal engine).
(n). Install the oil pan weldment (for the horizontal engine).
(o). Install the crankshaft rear oil seal unit( for the longitudinal engine ).
(p). Install the crankshaft rear oil seal unit (for the horizontal engine).
(q). Install the flywheel housing ( for the longitudinal engine ).
(r). Install the rear covering plate (for the horizontal engine).
(s). Install the flywheel assembly (for the longitudinal engine).
(t). Install the flywheel assembly (for the horizontal engine).

Page 528