Page 1825 - Workshop Manual - Tunland (2017)

TRANSMISSION（JC538） - TRANSMISSION ASSEMBLY 41-11

REPLACEMENT (2WD)

1 . Park the vehicle on level ground, engage the park brake and shift in N position.
2 . Disconnect battery negative cable. (Refer to "Chapter 20. Start & charge - battery,
replacement")
3 . Screw out the drain plug at the bottom of
the transmission, drain the transmission
oil and tighten the plug.

CAUTION

• Before draining, ensure the ventilation
plug is clear. Unscrew the drain plug and
drain the oil when the engine is hot, in
order to drain as much gearbox oil as
possible.
• When draining the gearbox oil, recycle it
with a special container and dispose it as
required.

4 . Disconnect the connection between the
transmission assembly and other parts.
(a) Disconnect the reverse lamp switch
connector.
(b) Remove the reverse lamp switch.

(c) Disconnect the speed sensor connector. 41
(d) Remove the speed sensor.