Page 1827 - Workshop Manual - Tunland (2017)

TRANSMISSION（JC538） - TRANSMISSION ASSEMBLY 41-13

(d) Screw out 12 fixing bolts, disconnect the
connection between the transmission and the
engine, and carefully lower the transmission
assembly.

9 . Install the transmission assembly.
(a) Support the transmission assembly with a
jack, engage in the forward gear and align the
first shaft with the spline at the center of the
clutch cover. Rotate the first shaft and fully
insert it. Return to the neutral gear.
DANGER

Support the transmission with a jack and take
necessary protective measures.

(b) Tighten 12 fixing bolts.
Torque: 30 ~ 35N·m

(c) Install the body bracket.
(d) Tighten the retaining bolts of the body bracket.
Torque: 78 ~ 96N·m

41

(e) Tighten the bolts connecting the gearbox and
the body bracket.
Torque: 41 ~ 51N·m

10 . Install the transmission shaft. (Refer to "Chapter 34. Axle & transmission shaft
- transmission shaft assembly, overhaul")