Page 1831 - Workshop Manual - Tunland (2017)

TRANSMISSION（JC538） - TRANSMISSION ASSEMBLY 41-17

9 . Remove the transmission assembly.
(a) Screw out the bolts connecting the
transmission and the body bracket.

(b) Screw out the retaining bolts.
(c) Remove the body bracket.

DANGER

Before operation, support the transmission with
a jack and take necessary protective measures.

(d) Screw out 12 fixing bolts, disconnect the
connection between the transmission and the
engine, and carefully lower the transmission
assembly.

41

10 . Install the transmission assembly.
(a) Support the transmission assembly with a
jack, engage in the forward gear and align the
first shaft with the spline at the center of the
clutch cover. Rotate the first shaft and fully
insert it. Return to the neutral gear.

DANGER

Support the transmission with a jack and take
necessary protective measures.

(b) Tighten 12 fixing bolts.
Torque: 30 ~ 35N·m