Page 1994 - Workshop Manual - Tunland (2017)
P. 1994

52-26                    POWER STEERING - STEERING PIPE ASSEMBLY

                                                      (c)    Tighten the retaining nuts of the oil pipe.

                                                             Torque:35～40 N·m
      52















                                                      (d)    Tighten the hollow bolts of the steering oil
                                                             pipe.
                                                             Torque: 40～45 N·m

                                                           CAUTION

                                                      When installing the oil pump, replace two
                                                      gaskets at the connection between the hollow
                                                      bolts and the oil pipe.






                                                      (e)    Install the pipe connected to the steering oil
                                                             can and tighten the retaining bolts of the pipe
                                                             clamp.
















                                                      (f)    Install the steering oil inlet pipe and tighten
                                                             the retaining bolts of the pipe clamp.
   1989   1990   1991   1992   1993   1994   1995   1996   1997   1998   1999