Page 289 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - POWER WINDOW 04-151

Multimeter connection Standard value
C032 (A12) -ground ＜ 2 Ω

C032 (A11)- ground ＜ 2 Ω

(g) Use multimeter to measure the resistance 04
between stitches B9 and B10 of connector
C033 of body controller and the ground.
Standard resistance (check whether there
is short circuit)

Multimeter connection Standard value

C033 (B9)- ground ＜ 2 Ω

C033 (B10)- ground ＜ 2 Ω

Check whether the result is normal?
Yes> go to step 7

No> Repair the to-ground circuit from body controller to the power window motor.

7 . Check assembly circuit of power lifter

(a) Disconnect the connector of power window
motor.
(b) Connect the positive (+) of the battery and
stitch Tl of the connector of power lifter
assembly, and connect negative (-) of the
battery and stitch T2 of the connector of
power lifter assembly. Power lifter assembly
should move up.
(c) Connect the positive (+) of the battery and
stitch Tl of the connector of power lifter
assembly, and connect negative (-) of the
battery and stitch T2 of the connector of
power lifter assembly. Power lifter assembly
should move down.

Check whether the result is normal?
Yes> go to step 8

No> replace power lifter assembly.

8 . Check short circuit of power supply switch of power window switch, driver’s
door