Page 364 - Workshop Manual - Tunland (2017)
P. 364
04-226 DIAGNOSTICS - POWER REARVIEW MIRROR
Check whether the result is normal?
Yes> go to step 6
No > Maintenance or replace harness.
6 . Check harness and connector (rearview mirror--ground)
04 (a) Ignition Switch: ON.
(b) Disconnect left power rearview mirror
connector J003.
(c) Disconnect right power rearview mirror
connector G002.
(d) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)
Multimeter connection Standard value
G002(2） - ground ＜ 2 Ω
J003(2） - ground ＜ 2 Ω
Check whether the result is normal?
Yes> go to step 7
No > Maintenance or replace harness.
7 . Check harness and connector (rearview mirror heating switch--ground)
(a) Ignition Switch: ON.
