Page 369 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - POWER DOOR LOCK CONTROL SYSTEM 04-231

BASIC INSPECTION

Inspection Measures
Steps
contents
Yes No> go to step 2
Check Battery voltage
Charge or replace the bat- 04
• Battery voltage shall not be lower than
1 tery. Refer to “Chapter
12V. No?
20A, start and charge- bat-
Check whether the result is normal?
tery”
Check basic functions Yes No> go to step 3
• Use lock master control switch to con-
trol the lock and unlock of all doors
• Use key to lock the door on the side of
the driver, all the doors should be
2 Go to defect phenomenon
locked. No?
• Use key to lock the door on the side of form
the driver, all the doors should be
locked.
Check whether the result is normal?

Check lock-prevention function of the Go to defect phenomenon
Yes
keys form
• Insert the key of the door into the igni-
tion switch.
• When the driver's door is open, press
down driving lever beside the driver to
3 lock the door, and all the doors should
be locked and then unlocked. No? Replace body controller
• When the driver's door is open, press
down master control switch of the door
and all the doors should be locked and
then unlocked.
Check whether the result is normal?