Page 418 - Workshop Manual - Tunland (2017)

04-280 DIAGNOSTICS - WIPER & WASHER

(d) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)

C036 Multimeter connection Standard value
04
A007 (2）-C036（E24） ＜ 2 Ω

A007

ftwxd041376

Check whether the result is normal?
Yes> go to step 5
No > Maintenance or replace harness.

5 . Check the harness and connectors (vehicle body controller - ground)
(a) Ignition Switch: ON.

(b) Use a multimeter to measure the voltage
between pin D4 of connector C035 of vehicle
body controller and ground.
Standard voltage

C035 Multimeter connection Standard value

C035 (D4) - ground Battery voltage

ftwxd041377

Check whether the result is normal?
Yes> go to step 6
No> replace body controller

6 . Check the harness and connectors (vehicle body controller - combination switch
(wiper)).
(a) Ignition Switch: OFF.