Page 413 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - WIPER & WASHER 04-275

(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
A007
is an open circuit)
R10
Multimeter connection Standard value
04
R10（4）- A007（5） ＜ 2 Ω

ftwxd041373

Check whether the result is normal?
Yes> Go to step 8
No > Maintenance or replace harness.

8 . Check the harness and connectors (front wiper motor- ground)
(a) Ignition Switch: OFF.
(b) Pull out the low speed relay R10 of front wiper.

(c) Disconnect the connector A007 of front wiper
motor .

ftwx651010